home *** CD-ROM | disk | FTP | other *** search
- Path: col.hp.com!dkm
- From: dkm@col.hp.com (David K Martin)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Zip/SCSI problems
- Date: 1 Feb 1996 15:02:02 GMT
- Organization: HP Colorado Springs Division
- Message-ID: <4eqklb$4mk@nonews.col.hp.com>
- References: <1295.6604T1305T1806@bothwick.demon.co.uk>
- NNTP-Posting-Host: jello4.cs.itc.hp.com
- X-Newsreader: TIN [version 1.2 PL2]
-
- Neil Bothwick (neil@bothwick.demon.co.uk) wrote:
-
- : When I plugged the Zip into the external SCSI port, my system refused
- : to boot, it appeared to get to the bit where it scans the SCSI bus,
- : and stopped with the SCSI light on constantly. If I disconnect the
- : cable from the Zip, leaving it plugged into the controller, it still
- : hangs. However if I disconnect the SCSI cable from the CDROM, then
- : the system boots up and HDToolBox recognises the Zip.
-
- What addresses are the other SCSI devices set to? The ZIP can only be
- 5 or 6 and if your hard drive or CD-ROM are using those, you will have
- to change one.
-
- Dave Martin -dkm@col.hp.com
-